|Operating Temperature:||-30°C to +70°C|
The following table shows which setups were tested with this device, including the setup details and date of test:
|Hardware / Firmware Version||Module (Version)||Board (Version)||OS (OS / BSP Version)||Note||Test Date|
|Rev A / -||Apalis iMX6 (QM 4GB WB IT V1.0A)||Ixora (QM 4GB IT V1.0B)||Yocto (Linux) (2.8)|
It is necessary to install NetworkManager 1.21.1 and ModemManager 1.10.1. Currently this versions are not available in the standard BSP. Please see section below for more information.
Add NetworkManager and ModemManager from the following meta layer:
A short description on how to build the image can be found in the README file.
Tip: Even though the form factor is mini PCIe, modems often only use the USB interface. It will work even if your SoM doesn't have a PCIe interface, as long as the USB signals from the mini PCIe connector are available. You must check the datasheet of the specific device for more details.